Fritz! 310 - LED Indicators and Operation; Understanding LED Status; WPS Button Operation Guide; Safety and Handling Precautions

LEDs
The LEDs show the operating status:
on fl ashing
Quality of the wireless
radio signal
Connection to the wireless access point is interrupted
Power FRITZ!WLANRepeater 310
is ready for operation
• The FRITZ!WLANRepeater 310 is being started.
• Updating FRITZ!OS
WLAN
Wireless LAN function
enabled
• WPS in progress; fl ashes fast: WPS was aborted
• Enabling Mesh WiFi
• Adopting the wireless LAN settings
all Loading factory settings
WPS Button
With the WPS button you operate the FRITZ!WLAN
Repeater 310:
Press the WPS button
Initiate WPS / Enable
Mesh WiFi
1second
Connect with another
access point
6seconds
Factory Settings 15seconds
Security
• Operate the FRITZ!WLAN Repeater 310 in
a dry place that is free of dust. Provide for
suffi cient ventilation.
• FRITZ!WLAN Repeater 310 is intended
for indoor use only. Never let liquids get
inside the housing.
• Insert the FRITZ!WLANRepeater 310 into
an electrical outlet that is easy to reach.
• Do not open the FRITZ!WLAN Repeater 310
housing.
• Unplug the FRITZ!WLAN Repeater 310 from
the outlet before cleaning.
4 5