Fritz! WLAN Repeater 310 - Wps Button

LEDs
The LEDs show the operating status:
on ashing
Quality of the Wi-Fi signal Connection to FRITZ!Box or to wireless router is
interrupted
Power FRITZ!WLANRepeat-
er310 is ready for
operation
• The FRITZ!WLANRepeater310 is being started.
• Updating FRITZ!OS
WLAN Wi-Fi function enabled • Connecting
• Flashes fast: Connection was aborted
• Enabling Mesh
all Loading factory settings
“WPS” button
With the “WPS” button you operate the FRITZ!WLANRepeater310:
Press the "WPS" button
Connect repeater for 1second
Reconnect with the FRITZ!Box or
another repeater
6seconds
Factory settings 15seconds
10 11