Fritz! WLAN Repeater 310 - Technical Specifications; System Requirements

In the Home Network of a Wireless Router from Another Manufacturer
z For registration with a wireless router via WPS, the FRITZ!WLANRepeater310 adopts the
radio network name (SSID) and the password of the wireless router.
z Updates for the FRITZ!WLANRepeater310 can be performed in the FRITZ!WLAN
Repeater310 user interface under "System / Update".
z The user interface of the FRITZ!WLANRepeater310 can be opened on all connected
devices using the IP address the repeater was assigned by your wireless router.
z First check the user interface of your wireless router to nd out what IP address the
FRITZ!WLANRepeater310 was assigned, and then enter this IP address in the address
line of a web browser.
z See the documentation for your wireless router.
Technical Specications
z IEEE802.11n, compatible with
IEEE802.11b/g (Wi-Fi 4)
z Up to 300Mbit/s (gross); the user data
rate that can actually be achieved is
somewhat below the specied values.
z WPA2 (802.11i), WPA/WPA2 mixed mode
z Total active power: approx. 3W
z Wi-Fi 2.4-GHz range
2.4GHz – 2.483GHz, maximum 100mW
z 230V, 50Hz A/C
z 0°C to +40°C
z Measures: 81 x 51.5 x 66.5mm
z Weight: approx. 63g
z Two integrated antennas
System Requirements
z 2.4-GHz wireless router compliant with
IEEE802.11b/g/n, automatic IP address
assignment (DHCP)
z The wireless router must support the
encryption standard WPA or WPA2
z For expanded Mesh Wi-Fi functions:
FRITZ!Box with FRITZ!OS version 6.90
or higher
z Automatic IP address assignment
(DHCP)
z For rst conguration with WPS:
Wireless router that supports WPS
z For initial conguration without WPS:
Computer with Wi-Fi that supports the
WPA Wi-Fi encryption standard
z For the rst conguration of Wi-Fi: If
the MAC address lter is active in the
wireless router, the MAC address of the
FRITZ!Repeater must be entered as an
exception in the MAC address lter
8 9