“go to TABLE OF CONTENTS”
FRIULINOX ALI GROUPS.R.L. A SOCIO UNICO 52
Via Treviso,4 - 33083 Taiedo di Chions (PN) -Italy
7. Lift and remove the protective casing from its seat,
paying attention to the compensation valve, if any.
8. Cut the ties. The probe is located on the side of the
evaporator.
10. Secure the ties and connect the probe to the board.
11. Reposition the casing, closing it with the belt
12. Close the electric box and the central panel, paying
attention to the door microswitch.
To Next Page
Loading...