Fronius RI MOD/i CC Ethernet/IP-2P User Manual

Op erating
instructions
RI FB PRO/i
RI MOD/i CC Ethernet/IP-2P
42,0410,2198 015-02052022
DE
Bedienungsanleitung
EN-US
Operating instructions

Fronius RI MOD/i CC Ethernet/IP-2P Specifications

General

Category	Recording Equipment
Device Name	Fronius RI MOD/i CC Ethernet/IP-2P
Interface	Ethernet/IP
Number of Ports	2
Compatibility	Fronius inverters
Function	Data recording and communication

Summary

General

Safety

Danger from incorrect operation and work that is not carried out properly. Can result in serious personal injury and damage to property.

LED NS - Network status

Overview of the Network Status (NS) LED indicators and their meanings.

Data Transfer Properties

Details on transfer technology, medium, and bus connection.

LED MS - Module status

Overview of the Module Status (MS) LED indicators and their meanings.

Configuration Parameters

Key parameters for bus module communication with the robot.

Setting the Bus Module IP Address

Setting the IP address of the bus module using the DIP switch in the interface

Instructions on setting the IP address via DIP switch settings on the module interface.

Instructions for setting the IP address on the website of the power source

Step-by-step guide to configuring the IP address through the power source website.

Input and output signals

Data types

Explanation of data types used (UINT16, SINT16) and conversion examples.

Value Range for Working Mode

Defines the value ranges for signals related to the working mode.

Motor current M1

Value Range for Documentation Mode

Safety status

Welding voltage

Motor current M2

Input Signals (From Robot to Power Source)

Details of input signals transmitted from the robot to the power source.

Welding current

Motor current M3

Wire feed speed

Wire position

Value range Safety status

Output Signals

Output Signals (from Power Source to Robot)