23
EN
Technical data
For machines designed for special voltages, the technical data on the rating plate ap-
plies.
Special voltage
TransCut 300
Mains voltage 230 V
Mains voltage tolerance + 10 % / -15 %
Mains frequency 50/60 Hz
Mains fuse protection 16 A slow-blow
Cos phi 0,99
Cutting current range 16 - 30 A
Cuttingcurrent at 10 min/40°C (104°F) 35 % d.c. 30 A
60 % d.c. 22 A
100 % d.c. 18 A
Separable thicknesses of sheet metal up to 10 mm.
.39 in.
Recommended sheet thickness up to 6 mm.
.24 in.
Tank capacity 1.5 l
.40 gal
Cutting time (per tank) approx. 3 hrs.
Protection IP 23S
Marks of conformity CE
Safety S
EMC device class A
Measurements l x b x h 460 x 180 x 275 mm
18.11 x 7.09 x 10.85 in.
Lenght of the plasma cutting torch 4,7 m
15 ft. 5 in.
Weight (incl. plasma cutting torch) 14,6 kg
32.19 lb.
To Next Page
Loading...