47939 - 100' Retractable Hose Reel Assembly Instructions
Parts List:
Attention:
This is not intended to be used as a potable water source.
Do not attempt to open the outer covering. There are no user serviceable parts.
Tools required:
Drill with 3/8” masonry bit or 1/8” standard bit (see instructions below)
Adjustable or Socket Wrench
Masonry Structure Mounting Instructions (Primary Method):
Position Mounting Bracket (G) on wall at desired height and mark holes to prepare for drilling.
Using a 3/8” masonry drill bit, drill holes for the 4 Expansion Bolts (A).
Remove Nut, Lock Washer and Flat Washer from the Expansion Bolt. Insert Expansions Bolt and sleeve with the
threads facing outward into the drilled hole.
To Next Page
Need help?
General