Frontgate 61491 User Manual

Assembly Instructions
61491 Carlisle Woven High Back Dining Swivel Rocker
*Warning：DO NOT use power tools.
1.On a soft clean surface position the chair bucket upside down with the arms on the floor.
2.Remove the hardware and aluminum plates *1, *2, *3, *4 loosely attached to the springs shown in Picture 1. Do
not remove the hardware, springs, and aluminum plates *5 and *6 from the chair swivel base shown in Picture 3.
3.Align the 4 holes in the springs on the chair base with the four holes on the chair crossbar 1. Using the removed
hardware from Step 2 attach the springs to the crossbar using 4 bolts (A), 4 aluminum plates (B), 4 flat washers (C),
4 lock washers (D), and 4 nuts (E) as shown in Picture 2. Complete final assembly is shown in Picture 1. Correct
assembly of the chair to the swivel base is shown in Picture 3.
4.Once chair is assembled, firmly tighten all 8 bolts attaching the springs to the swivel base and to the chair shown
in Picture 3.
*Warning：The six (6) Plates MUST BE correctly assembled as shown in Pictures 1, 2 and 3. Failure to
position the plates as shown will result in spring failure which could cause personal injury. Product warranty
is void if the plates are not correctly positioned.
Care & Maintenance: Please do not use acid or alkaline washing liquid to clean the product. We recommend
a mild dish soap and warm water for best cleaning results on the metal frames and fabrics.
PARTS INCLUDED
Parts
Pictures
Description
Qty
A
Bolt
4
B
* Aluminum plate
4
C
Flat Washer
4
D
Lock Washer
4
E
Nut
4
Frontgate: Please contact one of our Product Specialists for assembly assistance or questions at 1-800-537-8484 or
email:ps@frontgate.com. Specialists are available weekdays 8:00 a.m. to 8:00 p.m .EST or Saturdays 9:30 a.m. to 6:00 a.m.

Frontgate 61491 Specifications

General

Brand	Frontgate
Model	61491
Category	Indoor Furnishing
Language	English

Summary

61491 Carlisle Woven High Back Dining Swivel Rocker Assembly

Assembly Steps

Step-by-step guide for assembling the dining swivel rocker, emphasizing safety and correct part alignment.

Care & Maintenance

Guidelines for cleaning the chair using mild soap and warm water, avoiding harsh chemicals.

61492 Carlisle Woven Swivel Rocking Lounge Chair Assembly

Assembly Steps

Step-by-step guide for assembling the lounge chair, highlighting safety precautions and correct component placement.

Care & Maintenance

Recommendations for cleaning the lounge chair with mild dish soap and warm water, advising against acidic or alkaline liquids.

61494 Carlisle Sling High Back Dining Swivel Rocker Assembly

Assembly Steps

Detailed steps for assembling the sling dining swivel rocker, including warnings about plate positioning and tool usage.

Care & Maintenance

Instructions for maintaining the sling dining swivel rocker, recommending gentle cleaning methods with mild soap and water.

61495 Carlisle Sling Swivel Rocking Lounge Chair Assembly

Assembly Steps

Guide to assembling the sling swivel rocking lounge chair, focusing on correct part attachment and avoiding power tools.

Care & Maintenance

Advice on cleaning the sling lounge chair, suggesting mild soap and warm water for optimal results on metal and fabric components.

68348 Carlisle Woven Barstool Assembly

Assembly Steps

Instructions for assembling the barstool, detailing part connection and tightening procedures, with attention to material sensitivity.

Care & Maintenance

Recommendations for maintaining the barstool, emphasizing gentle cleaning with mild soap and water for metal frames and fabrics.