Frontgate LOREN 163359 - Step 5: Attach L-Brackets to Wall Studs; Step 6: Secure Cabinet to L-Brackets

Page 5 of 6
STEP 5: Pull the Cabinet away from the Wall and attach the L-Brackets (D) to the Studs using
the Long Screws (B).
the Small Screws (C) to attach the L-Brackets (D) to the Cabinet.
NOTE: The L-Brackets (D) may not be completely on the Cabinet’s Top due to the Wall’s
base molding. Only screw into the Bracket holes that are completely on the Cabinet Top.
STEP 6: Slide the Cabinet underneath the previously installed L-Brackets (D) and use 2 or more of
D
B
D
C
Never spray any cleaner directly on the glass or mirror surface. Unless you can guarantee that the
cleaner does not run behind the glass or mirror over a seam where it can get behind the glass or
mirror and deteriorate the backing or ruin the wood finish. Most glass or mirror cleaner will run down
the glass and penetrate the seams and edges damaging the backing.