38
Without Mounting Template:
1. Measure 36" from the floor (maximum
height) to the bottom of the lower
bracket and mark mounting screw holes
to be drilled.
2. A
ttach lower bracket to wall – If mounting
to drywall, use 5 - #10 self-threaing 1.25"
flathead phillips screws with drywall
anchorsA
3. P
lace speaker on lower bracket and hold
in place. Be sure the locator hole on
the bottom of the speaker is securely
mated with bolt in the lower bracket
4. I
nsert upper bracket into the locator
hole on the top of the speaker and
place against the wall. Do not depress
the spring on the upper bracket. Mark
the upper bracket holes, then carefully
remove the speaker from the bottom
bracket. Attach upper bracket to wall
Speaker Placement & Mounting (cont’d)
1
2
3
To Next Page
Loading...
