39
5. Attach speaker to wall mount by
inserting the upper bracket into the
locator hole in the top of the speaker.
Gently lift the speaker upwards and
forward, mating the locator bolt on the
lower wall mount bracket with the
locator hole on the bottom of the
speaker
6
. Move swivel arm to align screw holes.
Screw in fixing bolt through the swivel
arm and into the screw hole in bottom
of speaker. Tighten.
To remove unit from wall mount, simply
unscrew the fixing bolt and lift the
s
peaker up and out.
Speaker Placement & Mounting (cont’d)
4
5
WARNING:
To prevent injury, this apparatus must be securely
attached to the wall using the wall brackets and mount-
ing screws or with the floor stand supplied with the
purchase of this system, both of which must be securely
fastened by the fixing bolt.
To Next Page
Loading...
