MAINTENANCE
Maintenance must be carried out by authorised technical
personnel.
The positioning and type of the defective elements to be repaired
or replaced can be seen in the spare parts drawings.
In order to avoid accidents: where the manipulation and/or
replacement of electrical components is to be carried out, always
disconnect the units from the electric mains beforehand.
Turn off power supply to the cabinet by disconnecting the power
plug before starting any maintenance on the cabinet.
In case of breakdown in the functioning of the unit, the user
must carry out the necessary steps to prevent the deterioration
of the product. i.e. destocking and removal to operational
storage facility.
Cleaning The Condenser Fins
The refrigerated cabinet normally requires no maintenance
except for cleaning the condenser fins every two to three
months.
- Disconnect the cabinet as described above
- Unscrew 4 recessed head screws with screwdriver for
recessed head screws.
- Remove front grill
- Check whether the condenser fins need cleaning
The condenser only needs cleaning when a layer of dust, fluff
and the like begins to build up between the fins.
- Clean the fins with a vacuum cleaner and brush attachment or
flat nozzle
- Replace the front grill after cleaning
- Put cabinet in operation
Regular cleaning of the condenser is important to save power
and avoid unnecessary servicing.
To Next Page
Loading...