INSTALLATION
Selecting the place of installation.
In selecting the place of installation, ensure that the following
instructions are observed, this being vital for proper and trouble
free working of the cabinet:
- Do not install the cabinet outdoors
- Do not install the cabinet in the vicinity of heating radiators or
other heating sources.
- Do not install the cabinet where it is exposed to direct
sunlight (e.g. through windows)
- Avoid the installation of incandescent illumination.
Fluorescent lighting is recommended.
- Do not install the cabinet where it is exposed to draughts
from air conditioners, ventilators or open doors.
- Do not stack items on top of the unit.
- Keep the air intake and outlet area around the front grill area
of the cabinet clear of cartons and other obstacles.
- When installing the cabinet against a wall, make sure the
refrigeration unit fan is free to take in the ambient air from
the room via the front grill area and blow it off at the back.
Adhere to the minimum specific distance of 80mm
- When installing several cabinets alongside or behind one
another, be sure to observe the specific installation plan.
In all installation options, air exit must be unhindered at the back
of the refrigerated cabinet to exclude the accumulation of heat.
Only then is trouble-free operation guaranteed.
When the cabinet is installed as a stand alone unit against a wall,
a minimum distance of 80mm must be maintained between
cabinet back and room wall to ensure free air exit on the cabinet
back.
To Next Page
Loading...