3-2
3.2 Setting Daylight Savings Time/Stagger Between Polishings
1
2
3
Enter Code #: 1 6 5 5, in that sequence.
Press ON/OFF button to turn computer OFF.
Press PROG SCAN button to enter CODE.
Computer displays CODE
in the left display and
(Blank) in the right
display.
As each number is entered, dashes appear in the
right display. The computer is ready for
programming after the last number is entered.
Computer displays DAYLIGHT in the left display
and XXXX in the right display.
Press TEMP button to toggle between
FALL and SPRING. Press ENTER to
lock in choice.
To Next Page
Loading...
