1-8
1.6 Delaying Afternoon (PM) Polishing Cycle
1
2
3
4
5
Press any program button. The fryer will cook normally until the preprogrammed delay period expires.
The polish can only be delayed once. Polish must be performed within three-hour period or the controller
will go into polish lockout.
At 2 p.m. an alarm sounds and computer display alternates between START and PLSH.
Press EXIT/COOL FILTER button on computer
face and fryer returns to Drop mode.
Press and hold PROG SCAN and ENTER buttons for five seconds.
Display alternates between DYPL and the oil temperature.
To Next Page
Loading...
