EN 5
Place the converter on a at and secure desk.
Mounting the Converter
Desk Mounting
Installation Requirement
Do not operate it in an area that exceeds an ambient temperature
of 50°C.
The installation site should be well-ventilated.
Be sure that the converter is level and stable to avoid any hazardous
conditions.
Do not install the equipment in a dusty environment.
The installation site must be free from leaking or dripping water,
heavy dew, and humidity.
SPD
FX/LNK
PWR
TP/LNK
UMC-GA1SC1T-SM-FX
10/100/1000BASE-T to 100/1000BASE-X
Unmanaged Single Mode Gigabit Ethernet Media Converter
To Next Page
Loading...
