Need help?Do you have a question about the FSP Technology EP 1000 Series and is the answer not in the manual?
Central processing unit controlling UPS operations.
Converts DC to AC using full-bridge circuitry.
Provides power during outages; different types for models.
Procedure for starting UPS without utility power.
Evaluates utility line voltage for abnormalities.
Guides through battery and line mode checks.
General| Category | UPS |
|---|---|
| Topology | Line Interactive |
| Wattage | 600W |
| Input Frequency | 50 / 60Hz |
| Battery Recharge Time | 8 hours to 90% capacity |
| Protection | Overload protection |
| Communication Interface | USB, RS-232 |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -15°C to 45°C (5°F to 113°F) |
| Humidity | 0% to 95% non-condensing |
To Next Page
