Need help?Do you have a question about the FTX BANZAI and is the answer not in the manual?
Essential safety guidelines for operating the RC car to prevent damage and injury.
Lists essential tools for building, setting up, and maintaining the RC car.
Guidelines for safe battery charging, storage, and handling to prevent hazards.
Instructions on how to correctly install a charged battery into the RC car.
Important tips and warnings for safe and effective battery use and maintenance.
Details on the ESC's functions, capabilities, and technical specifications.
Step-by-step instructions for configuring the Electronic Speed Controller.
Explanation of functions controlled by the ESC trigger and buttons.
Crucial warnings about ESC water resistance, heat, and LiPO battery incompatibility.
Instructions for installing and replacing batteries in the 2.4GHz transmitter.
Overview of the transmitter's controls, buttons, and their respective functions.
Step-by-step process for pairing the transmitter with the RC car's receiver.
Guidance on frequently checking for loose parts, debris, and gear mesh.
Addresses causes for limited operating time, like battery or drivetrain problems.
Covers issues like motor dirt, brush wear, or low battery causing slow performance.
Explains overheating reasons such as over-gearing or binding transmission.
Diagnoses motor running but vehicle not moving due to gear issues.
Lists potential reasons for poor radio range or complete loss of operation.
Diagram of the motor assembly, including motor, ESC, and drive parts.
Information on the ESC, its type, and connection.
Information on the waterproof 2.4GHz receiver.
General| Motor Type | Brushed |
|---|---|
| Suspension | Independent |
| Terrain | Off-Road |
| Height | 190mm |
| Battery | 7.2V Ni-MH |
| Chassis | Plastic |
To Next Page
