To Next PageTo Next PageWhy is my FUAVE ACB07K01 Air Conditioner not cooling enough?
If your FUAVE Air Conditioner isn't cooling enough, ensure all doors and windows are closed. Remove any heat sources from the room, and check that the hot air exhaust hose is properly connected and not blocked. Also, make sure the temperature setting isn't too high and the air inlet isn't blocked. Adjust or clean these components as needed.
What to do if my FUAVE Air Conditioner does not start?
If your FUAVE Air Conditioner doesn't start, it might be due to a full water tank, indicated by a blinking water full indicator lamp. Drain the water tank. Alternatively, if in electric heating mode, the room temperature might be higher than the set temperature; adjust the temperature accordingly. If in cooling mode, the room temperature might be lower than the set temperature; in this case, adjust the temperature as well.
What does E2 code mean on my FUAVE Air Conditioner?
If your FUAVE Air Conditioner displays an E2 code, it means the water tank is full. Please empty the water tank to resolve this issue.
Why is my FUAVE ACB07K01 so noisy?
If your FUAVE Air Conditioner is noisy, ensure it is placed on a flat, level ground. The noise may also be due to the flowing of the refrigerant inside the air conditioner.
Why does my FUAVE ACB07K01 Air Conditioner auto power-off in heating mode?
The FUAVE Air Conditioner might automatically power off in heating mode as a heating protection feature. This occurs when the temperature at the air outlet exceeds 70°C. To resolve this, allow the room temperature to cool down before restarting the unit.
What does E0 code mean on my FUAVE ACB07K01?
If your FUAVE Air Conditioner is showing an E0 code, it indicates that the room temperature sensor has failed. Replace the room temperature sensor.
Details R290 refrigerant properties and specifies minimum room size for safe operation.
Covers indoor use, socket safety, avoiding fire, water, direct sun, pools, and inserting objects.
Includes upright handling, power disconnection, child supervision, and specific warnings.
Identifies and lists all key parts of the air conditioner unit.
Explains the functions of each button on the air conditioner's control panel.
Details the operations and buttons available on the remote control.
Steps to prepare the unit before initial operation, including installation and power connection.
Guides on using cooling, dehumidifying, and timer functions, plus drainage procedure.
Instructions for positioning the unit on a stable surface and ensuring correct electrical wiring.
Steps for connecting the hot-air exhaust hose to the unit and window connector.
Step-by-step guide for attaching the window seal for effective exhaust.
Instructions for cleaning the unit's exterior surface with a neutral detergent.
Guidance on how to clean the air filter every two weeks.
Lists common problems like unit not starting, not cooling, or being noisy with possible causes and remedies.
Explains E0 and E2 error codes and their corresponding solutions.
Information on proper disposal and recycling of the appliance at its end of life.
General| Brand | FUAVE |
|---|---|
| Model | ACB07K01 |
| Category | Air Conditioner |
| Language | English |
