Need help?Do you have a question about the Fuego Grill and is the answer not in the manual?
Remove grill from carton, lift box up to reveal grill, grate, and parts.
Attach the four wheels, ensuring locking wheels are diagonally opposite each other.
Secure lid handle, place diffuser panel, grate, lid, and attach grill handles.
Push control knob to START to ignite pilot flame and light both burners.
If ignition fails, turn knob OFF, wait 5 minutes, then repeat or use a match.
Control dual burner heat by turning dial left for high, right for low.
Turn dial to START, push and turn left to turn off inner burner for indirect heat.
Clean grill burner and orifice to ensure proper flame and prevent blockages.
Replace residue cup and clean cast iron grates and frame regularly.
Clean igniter tip for proper ignition and wipe down grill surface to protect from elements.
Season cast iron grates before cooking to resist rust and create a non-stick surface.
Preheat grill surface to ensure an overall hot surface with even temperature.
Instructions for using and cleaning the pizza stone accessory.
Instructions for using and seasoning the griddle plate accessory.
To Next Page
General