User Manual Fugoo XL Bluetooth Speaker model FSNA2 page 8 4/21/2015
Power Save mode On / Off
The speaker can shut itself off to conserve power, after a period of inactivity. Power Save
mode can be toggled on and off by holding the
–
(volume down) button while turning the
speaker on with the (Power) button.
If Power Save mode is on, then the speaker will shut itself off as follows…
If the speaker is not connected to a source device
and is not charging, the speaker turns off after 15 minutes of inactivity.
If the speaker is not connected to a source device
and is charging, the speaker turns off after 30 minutes of inactivity.
If the speaker is connected to a source device
and is not charging, the speaker turns off after 1 hour of inactivity.
If the speaker is connected to a source device
and is charging, the speaker will not shut off automatically.
If Power Save mode is off, then the speaker will remain on until you turn it off by pressing
the (Power) button for one second.
Resetting the speaker
• It the speaker becomes unresponsive, or behaves differently than you believe it
should, try resetting it. Hold the (Bluetooth) and
(Action) buttons for ten
seconds. This will reset the speaker, without clearing its pairing list.
• The speaker can be reset whether it's on or off.
Updating your Fugoo Bluetooth Speaker's firmware
Fugoo posts new versions of the speaker firmware from time to time to add features,
improve the sound quality and loudness, and enhance the user interface.
The firmware updates are installed by an Update Utility that is compatible with Windows
8, Windows 7, Windows Vista, Windows XP, and Mac OSX 10.6 and higher.
Please visit the Start page on our website to download the Update Utility and the latest
speaker firmware.
To Next Page
Loading...
