To Next PageTo Next PageHow to fix Fuji Xerox Printer that is not powered on?
If your Fuji Xerox printer isn't turning on, first, ensure the power cord is securely plugged into both the printer and the power outlet. If it is, try switching the machine power off, then reconnecting the power cord to both the power outlet and the machine. Then switch the machine power on. Also, verify that the power outlet supplies the correct voltage and current for the printer.
What to do if my Fuji Xerox ApeosPort C4570 display is blank?
If the display on your Fuji Xerox printer is blank, the printer might be in Power Saver Mode. Try pressing the Power button on the Control Panel to exit this mode. If the display remains blank after this, there may be a problem with the machine.
Why is my Fuji Xerox ApeosPort C4570 Printer making an odd noise?
An odd noise from your Fuji Xerox printer could be due to a few reasons. Ensure the printer is installed on a level and sturdy surface. Also, make sure the trays are firmly pushed into the machine. If the noise persists, switch the machine power off, and then there may be a foreign object inside the machine. If the object cannot be removed without dismantling the machine, there may be a problem with the machine.
What to do if condensation has formed in my Fuji Xerox Printer?
If condensation has formed in your Fuji Xerox printer, set the Sleep Mode trigger time to more than 60 minutes on the control panel, and let the machine stand with its power on for 60 minutes. Before using the machine, ensure that no water droplets remain inside the machine (rollers, metal parts, etc.). If condensation occurs frequently, keep the machine power switched on by selecting [Device] > [System Settings] > [System Clock / Timers] > [Warmer Mode] > [On] on the Control Panel.
General| Brand | Fuji Xerox |
|---|---|
| Model | ApeosPort C4570 |
| Category | Printer |
| Language | English |
Explains the function of each button and indicator on the control panel.
Discusses recommended, unusable, and handling of paper.
Instructions for loading paper and configuring tray settings on the Home screen.
Lists recommended consumables and how to handle them.
Step-by-step guide for replacing the toner cartridge.
Addresses issues like power, display, noise, condensation, and power saver mode.
Procedures for removing jammed paper from various locations.
Important precautions for machine installation, environment, and legal notices.
