Error Code
521
Problem Solving
15
018-586
[Cause] Login to the NetWare server was denied.
[Remedy] Check the followings:
z
The NetWare server is accessible by PC
z
Login user name
z
Login password
z
Volume name
z
Server or tree name
z
Context name
Run DSREPAIR at the server console on the NetWare server.
018-587
[Cause] There are duplicate file names.
[Do Not Save] is set as a handling method when names are
duplicated for scanned files.
[Remedy] Set the process to be executed in case of a file name duplication
to other than [Do Not Save].
018-588
[Cause] Detected an incorrect filing policy (when add was selected)
after connecting to the server.
[Remedy] When [Rename New File] is set as the process to be executed
when file names are duplicate, confirm that the file format is
not multi-page.
018-589
[Cause] Failed to access the NEXTNAME.DAT file.
[Remedy] When [Rename New File] is set as the process to be executed
when file names are duplicate, check the NEXTNAME.DAT file is
correct.
018-590
[Cause] A file or folder of the same name was detected on the server.
[Remedy] Take one of the following measures:
1) Execute the operation again by not accessing the same folder
or the same server from multiple machines.
2) If the error still is not resolved, contact our Customer Support
Center.
018-591
[Cause] When the machine was connected to the server and the name
of a file or folder on the server was determined, the suffix of the
name of the file or folder exceeded the limit value.
[Remedy] Change the file name or forwarding destination folder of the
scan server. Also try moving or deleting the files within the
forwarding destination folder.
018-592
[Cause] Failed to delete a scan lock folder.
[Remedy] Take one of the following measures:
1) If an existing lock directory (*.LCK) remains in the forwarding
destination, delete it manually, and then execute the job
again.
2) Confirm that there is a folder with the name specified.
018-593
[Cause] Failed to create the scan lock folder.
[Remedy] If an existing lock directory (*.LCK) remains in the forwarding
destination, delete it manually, and then execute the job again.
Error Code
Cause and Remedy
To Next Page
Loading...
