Fuji Xerox ApeosPort-V 3065 Administrator's Guide

Problem Solving
612
Problem Solving
15
4 Pull up the metal part of the staple cartridge as shown in the illustration.
5 Remove the jammed staples (1), and then return the metal part pulled up in step 4 to the
original position (2).
6 Push the staple cartridge into the machine until it clicks into place.
7 Close the finisher front cover.
Note
z
If the finisher front cover is not completely closed, a message will appear and the machine remains paused.
If you cannot remove jammed staples even after you perform the above procedure,
contact our Customer Support Center.
Staple Jams in Staple Cartridge (For Finisher-B1)
This section describes how to clear staple jam occurred in the staple cartridge of the
Finisher-B1 (optional).
CAUTION
Be careful in removing jammed staples.

Fuji Xerox ApeosPort-V 3065 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Speed (A4, Black/White)	30 ppm
Print Speed (Black/White)	Up to 30 ppm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Memory	2 GB
USB	USB 2.0
Copy Speed (Black/White)	30 cpm
Scanner Type	Flatbed, ADF
Paper Size	A4, A5, B5, Legal, Letter
Paper Weight	60-220 gsm
Paper Capacity	550 sheets
Connectivity	USB
Ethernet	Yes
PDL	PCL6, PostScript 3
Copy Speed (A4)	30 ppm