EasyManuals Logo

Fuji Xerox ApeosPort-V 7080 User Manual

Fuji Xerox ApeosPort-V 7080
745 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #476 background imageLoading...
Page #476 background image
15 Problem Solving
476
Problem Solving
15
017-760
[Cause] An error occurred in connecting to the POP3 server. Probable causes are follows.
1.
When connecting to the POP3 server by the TLS communication, the port number is
incorrect.
2.
When connecting to the POP3 server by the SSL communication, an internal error
occurred.
[Remedy] For 1, set the correct port number for the POP3 server.
For 2, switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the error still is not resolved, contact our Customer
Support Center.
017-761
[Cause] A SSL server authentication error occurred because the server certificate for the POP3
server is invalid.
[Remedy] Use the valid server certificate for the POP3 server.
017-762
[Cause] The server certificate for the POP3 server is before the valid period.
[Remedy] Be sure to match the time set on the POP3 server and the machine. If the time matches,
use the valid server certificate.
017-763
[Cause] The server certificate for the POP3 server is expired.
[Remedy] Be sure to match the time set on the POP3 server and the machine. If the time matches,
use the valid server certificate.
017-764
[Cause] The server addresses of the POP3 server and the server certificate are not same.
[Remedy] Use the valid server certificate in which the correct server address is written.
017-765
[Cause] An error occurred in connecting to the POP3 server.
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
Support Center.
017-766
[Cause] An error occurred in connecting to the POP3 server. Probable causes are follows.
1)When connecting to the POP3 server by the TLS communication, the port number is
incorrect.
2)When connecting to the POP3 server by the SSL communication, an internal error
occurred.
[Remedy] For 1, set the correct port number for the POP3 server.
For 2, switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power. If the error still is not resolved, contact our Customer
Support Center.
017-767
[Cause] A SSL server authentication error occurred because the server certificate for the POP3
server is invalid.
[Remedy] Use the valid server certificate for the POP3 server.
017-768
[Cause] The server certificate for the POP3 server is before the valid period.
[Remedy] Be sure to match the time set on the POP3 server and the machine. If the time matches,
use the valid server certificate.
017-769
[Cause] The server addresses of the POP3 server and the server certificate are not same.
[Remedy] Use the valid server certificate in which the correct server address is written.
017-770
[Cause] The server addresses of the POP3 server and the server certificate are not same.
[Remedy] Use the valid server certificate in which the correct server address is written.
Error Code Cause and Remedy

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox ApeosPort-V 7080 and is the answer not in the manual?

Fuji Xerox ApeosPort-V 7080 Specifications

General IconGeneral
BrandFuji Xerox
ModelApeosPort-V 7080
CategoryAll in One Printer
LanguageEnglish

Related product manuals