Passcode Setting for Extended Function
761
Appendix
16
Passcode Setting for Extended Function
A passcode is required to use the extended function on the machine.
Available Extended Function and Passcode
Important • It takes a few minutes longer to warm-up the machine after you set the passcode to enable the
extended function.
Following are instructions for enabling the extended function.
1 Press the <Log In/Out> button on the control panel.
2 Enter the System Administrator’s user ID with
the numeric keypad or the keyboard displayed
on the screen, and select [Enter].
Note • When a passcode is required, select [Next]
and enter the System Administrator’s
passcode.
3 Select [Tools] on the Services Home screen.
4 Select [Maintenance] in [Common Service
Settings] under [System Settings].
Extended Function Passcode
Fonts to Prevent Garbled Characters on Touch
Screen
OMLTCNPLGXCG@
Extensible Customization Function CXWDJAISBRRB@
To Next Page
Loading...
