Error Code
631
Problem Solving
15
"033-001" - "033-999"
029-703
[Cause] An error occurred in the communication with the Client Scan
client, or the client canceled the job.
[Remedy] Check the network communication with the Client Scan client
by checking the following.
z
Check that the amount of space of the Client Scan client is
enough.
z
Check the connection of the network cable.
Error Code
Cause and Remedy
033-310
033-311
033-312
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
033-313
[Cause] A communication error occurred between the machine and the
fax controller.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
033-314
033-315
033-316
033-317
033-318
033-319
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
033-320
033-321
033-322
033-323
[Cause] An error occurred during fax transmission.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
033-324
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
033-325
[Cause] An error occurred during fax transmission.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
033-326
033-327
033-328
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
Error Code
Cause and Remedy
To Next Page
Loading...
