Fuji Xerox C2265 - Page 47

Fuji Xerox C2265/C2263 Security Target
- 42 - Copyright

2016 by Fuji Xerox Co., Ltd
Security functional components PP Required
Component
Difference from PP
FIA_ATD.1 User attribute
definition
Yes Described in accordance with TOE.
FIA_SOS.1 Verification of secrets No Described in accordance with TOE.
FIA_UAU.1 Timing of
authentication
Yes Described in accordance with TOE.
FIA_UAU.7 Protected
authentication
feedback
No Authentication feedback is protected
by the addition of this SFR.
FIA_UID.1 Timing of
identification
Yes Described in accordance with TOE.
FIA_USB.1 User-subject binding Yes Described in accordance with TOE.
FMT_MOF.1 Management of
security functions
behaviour
No Setting of security functions is
restricted to system administrator only
by the addition of this SFR.
FMT_MSA.1(a)
FMT_MSA.1(b)
Management of
security attributes
Yes Management role of security
attributes is described in accordance
with TOE.
FMT_MSA.1(c)
FMT_MSA.1(d)
FMT_MSA.1(e)
FMT_MSA.1(f)
FMT_MSA.1(g)
FMT_MSA.1(h)
Management of
security attributes
No Management of security attributes is
described for the TOE.
FMT_MSA.3(a)
FMT_MSA.3(b)
Static attribute
initialisation
Yes Described in accordance with TOE.
FMT_MSA.3(c)
FMT_MSA.3(d)
FMT_MSA.3(e)
FMT_MSA.3(f)
FMT_MSA.3(g)
FMT_MSA.3(h)
Static attribute
initialisation
No Described for the TOE.
FMT_MTD.1(a)
FMT_MTD.1(b)
Management of TSF
data
Yes Operation list of TSF data are
described for the TOE.
Note that FMT_MTD.1(b) is for
D.CONF only.
FMT_SMF.1 Specification of
Management
Functions
Yes List of security management functions
is described for the TOE.
FMT_SMR.1 Security roles Yes Described in accordance with TOE.