Fuji Xerox C2265 - Page 88

Fuji Xerox C2265/C2263 Security Target
- 83 - Copyright

2016 by Fuji Xerox Co., Ltd
when an object or information is created.
[assignment: the authorized identified roles]
- none
FMT_MSA.3 (g) Static attribute initialization
Hierarchical to: No other components.
Dependencies: FMT_MSA.1 Management of security attributes
FMT_SMR.1 Security roles
FMT_MSA.3.1 (g) The TSF shall enforce the [assignment: access control SFP,
information flow control SFP] to provide [selection, choose one of:
restrictive, permissive, [assignment: other property]] default values
for security attributes that are used to enforce the SFP.
[assignment: access control SFP, information flow control SFP]
- DSR Access Control SFP in Table 23
[selection, choose one of: restrictive, permissive, [assignment: other
property]]
- [assignment: other property]
- Initialization property in Table 34
FMT_MSA.3.2 (g) The TSF shall allow the [assignment: the authorized identified roles]
to specify alternative initial values to override the default values
when an object or information is created.
[assignment: the authorized identified roles]
- none
FMT_MSA.3 (h) Static attribute initialization
Hierarchical to: No other components.
Dependencies: FMT_MSA.1 Management of security attributes
FMT_SMR.1 Security roles
FMT_MSA.3.1 (h) The TSF shall enforce the [assignment: access control SFP,
information flow control SFP] to provide [selection, choose one of:
restrictive, permissive, [assignment: other property]] default values
for security attributes that are used to enforce the SFP.
[assignment: access control SFP, information flow control SFP]
- D.FUNC Control SFP in Table 24
[selection, choose one of: restrictive, permissive, [assignment: other