1. Lift up the Cover A release lever, and open Cover A.
2. Remove any paper below the Fuser Unit by carefully pulling up and out.
If the jammed paper is inside the Fuser Unit, lower the green A2 lever in the direction of
the arrow to open the Fuser Unit Cover.
3. Close Cover A until the cover latches.
MAINTENANCE
MAINTENANCE
Clearing Paper Jams
Paper Jams in the Document Feeder
1. Open Document Feeder Cover and remove the jammed document.
2-3. If necessary, turn green wheel to feed out jammed document.
4. If a document is jammed underneath the inner guide, open inner guide.
5-6. Turn green wheel to remove the document. Gently close the cover.
Paper Jam in Cover A
If paper is torn, make sure to remove any
torn pieces of paper inside the machine.
Note
1
2
3
4
5
6
Paper Jams
1 2 3
34
34
To Next Page
Loading...
