EasyManuals Logo
Home>Fuji Xerox>All in One Printer>docucentre-iv C2270

Fuji Xerox docucentre-iv C2270 Administrator's Guide

Fuji Xerox docucentre-iv C2270
673 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #291 background imageLoading...
Page #291 background image
Installation When Using USB Port
289
Printer Environment Settings
7
5) Select [Enabled], and then select [Save].
3 Configure [Print Mode] or [Auto Eject Time] as necessary.
For information on the setting items, refer to "USB" (P.175)
4 Select [Close] repeatedly until the [Tools] screen is displayed.
5 Select [Close].
Note • Rebooting the machine may be required depending on the settings. When a message
displayed on the screen, follow the message and reboot the machine.
6 Print a configuration report to confirm that the USB port is enabled.
For information on how to print a configuration report, refer to "Printer Reports" (P.97).
Step 3 Configuration on the Computer
To print from the machine, you need to install a print driver on your computer.
For information on the supported operating systems, refer to "Supported Operating Systems" (P.284).
For information on the driver installation procedures, refer to the manual contained in the Driver CD
Kit.
You can print via USB from a Macintosh computer.
For information on the installation procedures of the print driver for Mac OS X, refer to the manual
contained in the CD-ROM provided with the driver.
For information on the installation procedures of Adobe PostScript 3 Kit (optional), refer to the manual
contained in the CD-ROM provided with the Adobe PostScript 3 Kit.
CentreWare Internet Services Setting Items
You can configure the following setting items using CentreWare Internet Services:
For details on the setting items, click [Help] at the upper right corner of the CentreWare Internet
Services screen to see help.
For information on how to start CentreWare Internet Services, refer to "Starting CentreWare Internet
Services" (P.276).
z
Receiving buffer size for the USB interface
([Properties] > [General Setup] > [Memory Settings] > [USB])
z
Port Settings
z
Bi-directional Communication
z
Auto Eject Time
z
Adobe Communication Protocol
Note • The Adobe Communication Protocol can be configured when the Adobe PostScript 3 Kit
(optional) is installed.
z
PostScript Wait Timeout
Note • The PostScript Wait Timeout can be configured when the Adobe PostScript 3 Kit (optional)
is installed.

Table of Contents

Other manuals for Fuji Xerox docucentre-iv C2270

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox docucentre-iv C2270 and is the answer not in the manual?

Fuji Xerox docucentre-iv C2270 Specifications

General IconGeneral
BrandFuji Xerox
Modeldocucentre-iv C2270
CategoryAll in One Printer
LanguageEnglish

Related product manuals