3 Maintenance
78
Maintenance
3
5 Close the finisher front cover.
Note • If the front cover is not completely closed, a message will appear and the machine remain
paused.
Replacing Stamp
If the machine offers the Fax service and the Stamp Kit (optional) is installed, replace
the stamp cartridge when stamp impressions start to fade.
Important • Do not touch the ink pad of the stamp cartridge. If it comes into contact with your skin, wash
immediately.
• Problems caused by using consumables not recommended by Fuji Xerox are not covered by
the maintenance service contract.
• Before using consumables, carefully read instructions and precautions on their packages.
Note • We recommend always keeping spare consumables/periodic replacement parts in stock.
• To order consumables, contact our Customer Support Center.
(Product Name: Stamp Replacement Kit, Product Code: F451)
1 Pull up the knob on the document feeder top
cover, and open the document feeder top
cover completely.
2 Pull up the lever to open the inner cover.
3 Stick the supplied pin into the old stamp
cartridge, and pull it straight out of the
machine.
Note • If only the sponge part of the stamp
cartridge is removed, make sure of
removing the bottom part of the cartridge.
Lever
To Next Page
Loading...
