3 Maintenance
84
Maintenance
3
1 Pull up the knob on the document feeder top
cover, and open the document feeder top
cover completely.
Note • When you fully open the cover, it enters a
fixed position. Open the cover gently.
2 While turning the rollers, wipe them with a
soft cloth moistened with water.
Important • Do not use cleaning agents other than
water or neutral detergent.
• Use a cloth firmly wrung to prevent water
drops from falling into the machine. If
water gets into the machine, it may cause
the machine to malfunction.
Note • If you cannot remove dirt easily, gently
wipe the rollers with a soft cloth
moistened with a small amount of neutral
detergent.
3 Close the document feeder left cover until it clicks into place, and confirm that there is
no space between the near or far side of the cover and the document feeder.
To Next Page
Loading...
