Operations during Scanning
273
Scan
5
îš„ [] button
When a preview image does not match the output, the [ ] button is displayed. Pressing the
[ ] button enables you to confirm the detailed information. The items which are not
reflected in the output are as follows:
Note • The [ ] button is not displayed during drag, flick, or rotating a previewed image or page.
z
MRC High Compression
- Displayed when [On] is set for [MRC High Compression] on the [File Format] screen.
z
TBD
- Displayed when [Specific Color] is selected.
z
TBD
- Displayed when [PDF], [DocuWorks], or [XPS] is set for [File Format], when [Auto
Upright Orientation] is set for [Searchable - Page Orientation], and when [Searchable]
is set for [Searchable Text].
Note • For information on how to set [Searchable - Page Orientation], refer to "5 Tools" > "Scan Service
Settings" > "Other Settings" > "Searchable - Page Orientation" in the Administrator Guide.
îš„ (Enlarged view)
A previewed image is enlarged or reduced.
z
When the slider is displayed.
z
When the thumbnailed bar is displayed.
In the enlarged view, the following operations are available:
z
Drag or flick the enlarged image side to side or up and down to move the position to be
displayed.
z
Double-tap the previewed image to change the ratio of the image size.
z
Tap the bottom of the touch screen to switch whether to display the slider or thumbnailed
bar.
z
Drag the slider to change the ratio of the image size.
z
Drag the thumbnailed bar side to side to scroll the page to be displayed. Then, you can
select the page to be previewed.
îš„ (Rotate Left)
Rotate the page 90 degrees left.
Note • You cannot select the [Rotate Left] button in the thumbnailed view.
To Next Page
Loading...
Need help?
General
