Fuji Xerox DocuCentre-V C4476 Administrator's Guide

Error Code
501
Problem Solving
15
011-310
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
012-210
012-211
012-212
012-213
012-221
012-222
012-223
012-224
012-227
012-228
012-231
012-232
012-233
012-234
012-243
[Cause] Finisher malfunction
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
012-246
[Cause] The Booklet Maker is not fully inserted completely into the Finisher.
[Remedy] Completely insert the Booklet Maker into the Finisher, and turn the machine off and
then on.
012-247
012-249
[Cause] Finisher malfunction
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
012-254
[Cause] Finisher malfunction
[Remedy] When you pull out a folio storing tray, make sure that it is not in a position where it
touches you and is not to be pulled out. Switch off the machine power, make sure that
the touch screen is blank, and then switch on the machine power. If the error still is not
resolved, contact our Customer Support Center.
012-259
012-260
012-263
012-265
012-266
012-268
012-269
012-274
012-279
012-280
012-282
012-283
012-284
012-288
[Cause] Finisher malfunction
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
Error Code Cause and Remedy

Fuji Xerox DocuCentre-V C4476 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-V C4476
Category	All in One Printer
Language	English