EasyManuals Logo
Home>Fuji Xerox>All in One Printer>DocuCentre-V C5576

Fuji Xerox DocuCentre-V C5576 Administrator's Guide

Fuji Xerox DocuCentre-V C5576
783 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #658 background imageLoading...
Page #658 background image
16 Appendix
658
Appendix
16
C3 Finisher with Booklet Maker (optional)
Type Output tray x 1 : Sorting/Stacking
Finisher tray x 1 : Sorting (Offset available)
Stacking (Offset available)
Booklet tray x 1 : Sorting/Stacking
Paper Size Output tray
Maximum : 12 x 19" (305 x 483 mm)
Minimum : Postcard
Finisher tray
Maximum : 12 x 19" (305 x 483 mm)
Minimum : B5
Booklet tray
Maximum : 12 x 18" (305 x 457 mm)
Minimum : B5
Paper Weight
Output tray : 52 - 300 gsm
*1
Finisher tray : 52 - 300 gsm
*1
Booklet tray : 60 to 105 gsm
*2
*1 : 52 - 55 gsm output paper may not be aligned properly.
*2 : Cover sheets can be up to 256 gsm.
Stacker Capacity Output tray : 500 sheets (A4)
Finisher tray - Unstapled sheets
A4 : 1,500 sheets
B4 or larger : 1,500 sheets
Mixed size
*1
:300 sheets
Finisher tray - Stapled sheets
A4 : 200 sets or 1,500 sheets
B4 or larger : 100 sets or 1,500 sheets
Mixed size
*1
: 70 sets or 200 sheets
Booklet tray : 20 sets
*2
*1 : With paper of a larger size delivered on paper of a smaller size.
*2 : This number may vary depending on the conditions.
Important When using P paper.
Staple Capability : 50 sheets
Note When the C3 Finisher Staple Unit 65 Sheets (optional) is installed, at
the maximum of 65 sheets can be stapled. Depending on the paper
type, copies may not be aligned or stapled properly.
When using with Folder Unit CD1, Z-fold sheets can be stapled;
however, since one Z-fold sheet of A3 or 11 x 17" paper becomes the
same in thickness as 10 sheets of unfold paper, the maximum number
of Z-fold sheets of A3 or 11 x 17" paper that can be stapled is reduced.
When converted into unfold sheets of paper that can be stapled, one
Z-fold sheet of A3 or 11 x 17" paper is equivalent to 10 sheets of
unfold paper and one Z-fold sheet of other size of paper is equivalent
to 20 sheets of unfold paper.
If the curl in the paper is very strong, the output paper may not be
stapled properly.
Paper size : Maximum: A3, 11 x 17", Minimum: B5
Position : 1 position or 2 positions
Important When using P paper

Table of Contents

Other manuals for Fuji Xerox DocuCentre-V C5576

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuCentre-V C5576 and is the answer not in the manual?

Fuji Xerox DocuCentre-V C5576 Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuCentre-V C5576
CategoryAll in One Printer
LanguageEnglish

Related product manuals