Job Assembly
175
Copy
3
Watermark
z
For more information, refer to "Watermark (Printing Control Numbers on the Background of Copies)" (P.156).
Secure Watermark
z
For more information, refer to "Secure Watermark (Managing Document Security)" (P.160).
[Copy] Screen When Build Job is in Progress
The following describes the screen that appears while the Build Job is being executed.
Chapter Start
Displays the [Build Job - Chapter Start] screen.
z
Refer to "[Build Job - Chapter Start] Screen" (P.176).
Insert Separators
Displays the [Segment Separators] screen.
z
Refer to "[Segment Separators] Screen" (P.177).
Change Quantity
Displays the [Change Quantity] screen on which you can change the number of copy sets
using the numeric keypad.
Change Settings
Displays the [Copy] screen on which you can change the settings for the next document.
After changing the settings, press the <Start> button on the control panel to start scanning
of the document. To return to the previous screen, press the < # > button.
When using a stored program for Build Job
While the machine makes copies using the Build Job feature, you can use a stored program.
1) Select [Change Settings].
2) Select the [Job Assembly] tab.
3) Select [Stored Programming].
4) Select the number of the stored program that contains the features you want to use.
z
For information on how to register a stored program, refer to "Registering Stored Programs for Build Job" (P.448).
To Next Page
Loading...
