Before Using the Machine
30
Before Using the Machine
1
5
Select [Warmer Mode], and then select [Change Settings].
z
Select [ ] to display the previous screen or [ ] to display the next screen.
6
Select [On].
z
If you select [Off], the machine will not enter the Warmer mode. To display a message when condensation
may have occurred, select [Condensation Alert].
7
Using [ ] and [ ], set the start time and duration of the Warmer mode.
îš„Start Time
Set the start time of the Warmer mode.
îš„Duration
Set the duration of the Warmer mode between 1 to 1440 minutes in 1 minute increments.
îš„Auto Start
Select the check box to automatically switch the Warmer mode to [On] when condensation
continued for a specific period of time.
To Next Page
Loading...
