Warmer Mode
31
Before Using the Machine
1
îš„Auto Stop
Select the check box to automatically switch the Warmer mode to [Off] after a specified
period of absence of condensation has elapsed.
z
If the power is off at the time specified in [Start Time], the machine will not enter the Warmer mode.
z
While the Warmer mode is enabled, the machine will not enter the Sleep mode and prevents or reduces
condensation.
z
[Auto Start] allows you to automatically enable the Warmer mode when the machine detects condensation
in future years.
8
Select [Save].
9
Select [Close] repeatedly until the Services Home screen is displayed.
z
When you configure settings under [System Settings] or [Setup] and then press the <Services Home> button,
the screen directly goes back to the Services Home screen.
To Next Page
Loading...
