EasyManua.ls Logo

Fuji Xerox DocuCentre-VI C5571

Fuji Xerox DocuCentre-VI C5571
889 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Printable Area
741
Appendix
16
Printable Area
This section describes the area on paper that can be printed.
Standard Printable Area
The area excluding the 4.1 mm margins on all four edges of paper.
Extended Printable Area
You can extend the printable area.
Note that the area may be limited by the machine.
Important
z
The machine cannot print on any area within 4 mm of the upper edge of paper and 2 mm of the lower, right,
and left edges of paper. For printing, the maximum printable area of the machine is 305.0 x 1194.0 mm. The
machine cannot print on any area outside of the maximum printable area.
Note
z
To extend the printable area, change the PCL print driver setting, or the [Print Area] setting on the touch
screen.
Reference
z
For more information on the setting method on the print driver, refer to the help provided for the print driver. For more information
on the setting on the control panel, refer to "Print Area" (P.267).

Table of Contents

Other manuals for Fuji Xerox DocuCentre-VI C5571

Related product manuals