Fuji Xerox DocuPrint P285 dw User Manual

Level 1 Level 2 Level 3 Level 4 Descriptions
Wi-Fi Direct Device Info. SSID
- Display the Group Owner's SSID.
IP Address
- Display your machine's IP Address.
Status Info. Status
- Display the Wi-Fi Direct network status.
Signal
- Display the current Wi-Fi Direct network signal
strength.
When your machine acts as Group Owner, the
LCD always displays Strong.
Channel
- Display the channel in use when the Status is
G/O Active or Client Active.
Speed
- Display the connection speed when the Status
is G/O Active or Client Active.
I/F Enable
- - Enable or disable the Wi-Fi Direct connection.
NFC
- - - Turn the NFC function on or off.
Network
Reset
- - - Restore all network settings of your machine to
the factory settings.
1
On connection to the network, if the machine's ‘Boot Method’ is ‘Auto’ the machine will attempt to set the IP address and Subnet Mask
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254].
[000-255]. If the ‘Boot Method’ of the machine is set to ‘Static’ you must manually enter an IP address from the machine's control panel.
For wired network models
Level 1
Level 2 Level 3 Level 4 Descriptions
Wired LAN TCP/IP Boot Method
- Choose the IP method that best suits your
needs.
IP Address
- Enter the IP address.
Subnet Mask
- Enter the Subnet mask.
Gateway
- Enter the Gateway address.
Node Name
- Enter the Node name.
WINS Config
- Select the WINS configuration mode.
WINS Server Primary
Specify the IP address of the primary WINS
server.
Secondary
Specify the IP address of the secondary WINS
server.
DNS Server Primary
Specify the IP address of the primary DNS
server.
Secondary
Specify the IP address of the secondary DNS
server.
APIPA
- Allocate the IP address from the link-local
address range automatically
1
.
IPv6
- Enable or disable the IPv6 protocol.
Ethernet
- - Choose the Ethernet link mode.
Wired Status
- - Display the Ethernet link status.
MAC Address
- - Display the MAC address of the machine.
Set to Default
- - Restore wired network settings of your machine
to the factory settings.
Wired Enable
- - Turn the wired interface on or off.
Network Reset Network Reset
- - Restore all network settings of your machine to
the factory settings.
239

Fuji Xerox DocuPrint P285 dw Specifications

General

Brand	Fuji Xerox
Model	DocuPrint P285 dw
Category	Printer
Language	English