Home > Paper Handling > Load Paper > Load and Print Using the Multi‑purpose Tray (MP Tray) > Load
and Print Labels Using the MP Tray
Load and Print Labels Using the MP Tray
Related Models: DocuPrint P285 dw
When the back cover (face up output tray) is pulled down, the machine has a straight paper path from the MP
tray through to the back of the machine. Use this paper feed and output method when you print on labels.
When you load a different size and type of paper in the tray, you must also change the Paper Size and Paper
Type settings in the machine, or on your computer.
1. Open the machine's back cover (the face up output tray).
2. On the front of the machine, open the MP tray and lower it gently.
When using paper smaller than A6/A5 (Long Edge), you can skip the next step.
3. Pull out the MP tray support (1).
When using Legal or Folio size paper, pull out the paper support (1).
4. Slide the MP tray paper guides to fit the width of the paper you are using.
5. Load paper with the printing surface face up in the MP tray.
22
To Next Page
Loading...
Need help?
General
