Fuji Xerox DocuPrint P285 dw User Manual

Home > Paper Handling > Load Paper > Load and Print Using the Multi‑purpose Tray (MP Tray) > Load
and Print Envelopes Using the MP Tray
Load and Print Envelopes Using the MP Tray
Related Models: DocuPrint P285 dw
You can load up to two envelopes in the MP tray.
Before loading, press the corners and sides of the envelopes to make them as flat as possible.
When you load a different size and type of paper in the tray, you must also change the Paper Size and Paper
Type settings in the machine, or on your computer.
1. Open the machine's back cover (the face up output tray).
2. Pull down the two green levers, one on the left side and one on the right side, as shown in the illustration.
3. On the front of the machine, open the MP tray and lower it gently.
4. Pull out the MP tray support (1).
1
5. Slide the MP tray paper guides to fit the width of the envelopes that you are using.
24

Fuji Xerox DocuPrint P285 dw Specifications

General

Brand	Fuji Xerox
Model	DocuPrint P285 dw
Category	Printer
Language	English