Home > Network > Additional Methods of Configuring Your Fuji Xerox Machine for a Wireless
Network > Use Wi-Fi Direct
®
> Configure Your Wi-Fi Direct Network > Wi-Fi Direct Network Configuration
Overview
Wi-Fi Direct Network Configuration Overview
Related Models: DocuPrint P275 dw/DocuPrint P285 dw
The following instructions offer five methods for configuring your Fuji Xerox machine in a wireless network
environment. Select the method you prefer for your environment:
Check your mobile device for configuration.
1. Does your mobile device support Wi-Fi Direct?
Option Description
Yes Go to Step 2
No Go to Step 3
2. Does your mobile device support one-push configuration for Wi-Fi Direct?
Option Description
Yes See Related Information: Configure Your Wi-Fi Direct Network Using the One-
Push Method.
No See Related Information: Configure Your Wi-Fi Direct Network Using the PIN
Method.
3. Does your mobile device support Wi-Fi Protected Setup
™
(WPS)?
Option Description
Yes Go to Step 4
No See Related Information: Configure Your Wi-Fi Direct Network Manually.
4. Does your mobile device support one-push configuration for Wi-Fi Protected Setup
™
(WPS)?
Option Description
Yes See Related Information: Configure Your Wi-Fi Direct Network Using the One-
Push Method of Wi-Fi Protected Setup
™
(WPS).
No See Related Information: Configure Your Wi-Fi Direct Network Using the PIN
Method of Wi-Fi Protected Setup
™
(WPS).
To use Print Utility functionality in a Wi-Fi Direct network configured by one-push configuration using Wi-Fi
Direct or by PIN Method configuration using Wi-Fi Direct, the device you use to configure Wi-Fi Direct must be
running Android
™
4.0 or greater.
Related Information
• Configure Your Wi-Fi Direct Network
• Configure Your Wi-Fi Direct Network Using the One-Push Method
• Configure Your Wi-Fi Direct Network Using the One-Push Method of Wi-Fi Protected Setup
™
(WPS)
• Configure Your Wi-Fi Direct Network Using the PIN Method
77
To Next Page
Loading...
Need help?
General
