108
Home > Network > Additional Methods of Configuring Your Fuji Xerox Machine for a Wireless Network > Use
Wi-Fi Direct
®
> Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Using the PIN
Method
Configure Your Wi-Fi Direct Network Using the PIN Method
If your mobile device supports the PIN Method of Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct
network:
1.
Press
▲
or
▼
to select the [Network] option, and then press OK.
2.
Press
▲
or
▼
to select the [Wi-Fi Direct] option, and then press OK.
3.
Press
▲
or
▼
to select the [PIN Code] option, and then press OK.
4.
When [Wi-Fi Direct On?] appears, press
▲
to accept. To cancel, press
▼
.
5.
Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when
[Activate Wi-Fi Direct on other device and press OK.] appears on the machine's LCD. Press
OK on your machine.
This will start the Wi-Fi Direct setup. To cancel, press Cancel.
6.
Do one of the following:
• When your Fuji Xerox machine is the Group Owner (G/O), it will wait for a connection request from your
mobile device. When [Input PIN Code] appears, enter the PIN displayed on your mobile device in your
Fuji Xerox machine. Press OK to complete the setup.
If the PIN is displayed on your Fuji Xerox machine, enter the PIN in your mobile device.
• When your Fuji Xerox machine is not the G/O, it will display available device names with which to configure
a Wi-Fi Direct network. Press
▲
or
▼
to select the mobile device you want to connect to and press OK.
Search for available devices again by pressing [<Rescan>], and then go to the next step.
7.
Do one of the following:
• Press
▲
to display the PIN on your Fuji Xerox machine, enter the PIN in your mobile device, and then go to
the next step.
• Press
▼
to enter the PIN displayed by your mobile device in your Fuji Xerox machine. Press OK, and then
go to the next step.
If your mobile device does not display a PIN, press Cancel on your Fuji Xerox machine. Go back to the first
step and try again.
8.
If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed
the Wi-Fi Direct network setup.
• Configure Your Wi-Fi Direct Network
Related Topics
• Wi-Fi Direct Network Configuration Overview
Related Models:DocuPrint P385 dw/DocuPrint P375 dw
To Next Page
Loading...
Need help?
General
