199
Home > Security > Network Security Features > Store Print Log to Network > Use the Store Print Log to
Network's Error Detection Setting
Use the Store Print Log to Network's Error Detection Setting
Use Error Detection Settings to determine the action that is taken when the print log cannot be stored to the server
due to a network error.
1.
Start your web browser.
2.
Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.0.2.1
3.
Type a password, and then click . The default password is "x-admin". To ensure security, it is important you
change the password.
4.
Click the Administrator tab.
5.
Click the Store Print Log to Network menu in the left navigation bar.
6.
In the Error Detection Setting section, select the Cancel Print or Ignore Log & Print option.
7.
Click Submit to display the Test Print Log to Network page.
To test your settings, click Yes and then go to the next step.
To skip the test, click No. Your settings will be submitted automatically.
8.
The machine will test your settings.
9.
If your settings are accepted, Test OK appears on the screen.
If Test Error appears, check all settings, and then click Submit to display the Test page again.
• Store Print Log to Network
Option Description
Cancel Print If you select the Cancel Print option, the print jobs are cancelled when the print log cannot
be stored to the server.
Ignore Log &
Print
If you select the Ignore Log & Print option, the machine prints the documentation even if the
print log cannot be stored to the server.
When the store print log function has recovered, the print log is recorded as follows:
a. If the log cannot be stored at the end of printing, the print log except the number of printed
pages will be recorded.
b. If the print log cannot be stored at the beginning and the end of printing, the print log of
the job will not be recorded. When the function has recovered, the error is reflected in the
log.
To Next Page
Loading...
Need help?
General
