285
*1
On connection to the network, if the machine's ‘Boot Method’ is ‘Auto’ the machine will attempt to set the IP address
and Subnet Mask from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be
allocated, such as 169. 254. [001-254]. [000-255]. If the ‘Boot Method’ of the machine is set to ‘Static’ you must
manually enter an IP address from the machine's control panel.
[Reset Menu]
• Settings and Features Tables
Wi-Fi Direct Push Button - Configure your Wi-Fi Direct network settings using the
one-button push method quickly.
PIN Code - Configure your Wi-Fi Direct network settings using
WPS with a PIN code quickly.
Manual - Configure your Wi-Fi Direct network settings manually.
Group Owner - Set your machine as the Group Owner.
Device Info. Device Name View your machine's device name.
SSID Display the Group Owner's SSID.
IP Address Display your machine's IP Address.
Status Info. Status Display the Wi-Fi Direct network status.
Signal Display the current Wi-Fi Direct network signal
strength.
When your machine acts as Group Owner, the LCD
always displays Strong.
Channel Display the channel in use when the Status is G/O
Active or Client Active.
Speed Display the connection speed when the Status is G/O
Active or Client Active.
I/F Enable - Enable or disable the Wi-Fi Direct connection.
IPsec - - IPsec is an optional security feature of the IP protocol
that provides authentication and encryption services.
We recommend contacting your network administrator
before changing this setting.
Network Reset - - Restore all network settings of your machine to the
factory settings.
Level 1 Description
Network Restore all network settings of your machine to the factory settings.
Factory Reset Reset the machine and restore the printer settings (including command settings) to the factory
settings.
Level 1 Level 2 Level 3 Description
To Next Page
Loading...
Need help?
General
