Need help?Do you have a question about the FUJICA ST801 and is the answer not in the manual?
Instructions for removing the mount ring assembly.
Steps for disassembling aperture components.
Steps for disassembling helicoid components.
Procedure for adjusting lens focusing.
Steps to repair helicoid movement issues.
Procedure for adjusting aperture settings.
Steps to fix aperture blades stuck due to oil.
Steps to fix issues with the aperture seat.
Procedure to fix issues with mount ring levers.
Instructions for handling the aperture selector ring.
Steps to fix issues with the cam ring.
Checking the aperture transmission pin for height and damage.
Checking for scratches, dirt, or contamination.
Verifying smooth movement of the helicoid.
Checking aperture ring and blades for proper function.
Setting focusing ring and aperture to default positions.
General| Film Format | 35mm |
|---|---|
| Lens Mount | M42 screw mount |
| Exposure Metering | TTL center-weighted |
| Year Introduced | 1972 |
| Type | SLR |
| Shutter | Focal plane shutter |
| Shutter Speed | 1 sec to 1/2000 sec, B |
| Flash | Hot shoe |
| Manufacturer | Fuji |
| Power Source | PX625 mercury battery |
| Viewfinder | Fixed pentaprism |
To Next Page
