To Next PageTo Next Page
Need help?Do you have a question about the FUJIDENZO IWAR-5020 and is the answer not in the manual?
Covers compressor start conditions, delay intervals, and stopping criteria.
Describes detection and shutdown procedures for refrigerant leaks.
Incorrect signal detected; check connection cord.
Voltage error; check DC high tension cords and connections.
Compressor discharge tube is overheated; check dissipation, ventilation.
IPM module error; check ground wire and driving board.
Discharge tube error; check sensor connection CN35.
IPM heat sink sensor error; check refrigerant pressure.
Compressor operation error; check wiring and ground wire.
Indoor temperature sensor failure; check sensor connection CN31.
Evaporator sensor failure; check sensor connection CN32.
General| Brand | FUJIDENZO |
|---|---|
| Model | IWAR-5020 |
| Category | Air Conditioner |
| Language | English |
