Need help?Do you have a question about the FUJIDENZO YB1F2 and is the answer not in the manual?
The component responsible for transmitting signals from the remote control.
Starts or stops the unit, and clears the timer or sleeping function of the last operation.
Changes the operating mode of the air conditioner (e.g., AUTO, COOL, DRY, FAN, HEAT).
Increases or decreases the set temperature by 1°C, with a range of 16-30°C.
Adjusts the fan speed between Auto, Low, Middle, and High settings.
Turns the up and down swing function on/off and adjusts the angle in stationary mode.
Activates Health function or Energy Save mode for improved air quality or efficiency.
Turns the left and right swing function on/off and adjusts the angle in stationary mode.
Keeps the indoor fan running for 10 minutes after unit shutdown to dry the evaporator.
Displays preset temperature or indoor ambient temperature, allowing setting adjustments.
Sets the timer for the unit to turn on or off within a range of 0.5 to 24 hours.
Enables super-high fan speed for quick cooling or heating in specific modes.
Activates sleep mode for gradual temperature adjustment during cooling or heating.
Turns the display light on or off, affecting the icon visibility and indicator light.
Explains the X-FAN function for preventing mold by drying the evaporator after shutdown.
Unit automatically selects operating method based on room temperature for comfort.
Runs the unit at super-high fan speed for rapid temperature adjustment.
Locks or unlocks the remote controller keyboard to prevent accidental operation.
Allows switching the temperature display between Fahrenheit and Centigrade units.
Details the operation and activation of a new defrosting function for the unit.
Step-by-step guide on how to replace batteries in the wireless remote controller.
Guidelines on battery usage, storage, and troubleshooting for the remote controller.
General| Brand | FUJIDENZO |
|---|---|
| Model | YB1F2 |
| Category | Remote Control |
| Language | English |
To Next Page